|
1. PVC plastic door and windows profile extrusion line introduction
Plastic door and window profile production line use PVC powder to create all kinds of plastic door and window profile, decoration material etc. The latest technology, to optimize the design of the unit, with plastics uniform shear rate in small, high output, long life etc.
The use conical twin-screw extruder, vacuum calibration machine, traction machine, cutting machine, stack machine. Main machine use AC inverter or DC speed drag, high-precision temperature control instrumentation. Auxiliary vacuum pump and traction motor are quality products, easy maintenance and replacement of screw barrel and die, you can direct extrusion foam profile wood simulation results better than the single screw machine.
Depending on the mould, the use stereotypes Units 4 meter, 6 meter, 8 meter, 11 meter specifications. Parallel twin-screw extruder configuration, especially for high-speed extrusion profiles.
The unit main used in the production of PVC, PP and other material of a variety of plastic door and window profile, wainscoting, ceilings etc.
2. PVC plastic door and windows profile production line technical parameters
Production line model |
Extruder |
Width |
Auxiliary total power |
Cooling water capacity |
Compressed air pressure |
Traction speed |
Production output |
MS-PXC180 |
SJSZ51×22 |
180mm |
18.7kw |
5 |
0.6Mpa |
1-8m/min |
100KG/H |
MS-PXC240 |
SJSZ65×22 |
240mm |
27.5kw |
5 |
0.6Mpa |
1-6m/min |
150KG/H |
MS-PXC300 |
SJSZ80×80 |
300mm |
33.1kw |
7 |
0.6Mpa |
1-8m/min |
260KG/H |
3. PVC plastic door and windows profile production line picture
|
|
|